How to Setup

  1. Lay the shirt flat, inside facing up. The two round holes on the back are for the fans.
  2. Fit the intake rings. The intake rings have the Dogged Workwear logo on them. Push one through each hole from the outside.
  3. Attach the fans. From the inside, line each fan (the one with the 5V sticker) up with its ring and twist until it locks.
  4. Insert the power bank into the inside pocket and plug in the cable.
  5. Attach the cords. Run the longer cord to the far fan and the shorter one to the near fan, tucking them under the lining so they stay off your skin.
  6. Switch on. Pick low, medium or high.
  7. Zip up and you're ready to go.

Prefer to watch? Here's a quick video demo :)

How to Wash

  1. Take out the power bank. Charge it overnight while the shirt's in the wash.
  2. Unplug the cables and close up the pocket.
  3. Untwist both fans and pull them out.
  4. Pull out the intake rings.
  5. Throw the shirt in the wash.

Prefer to watch? Here's a quick video demo :)